Crestron TPMC-3SM Fusion RV™ Interface Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Crestron, the Crestron logo, Fusion RV, Isys and RoomView are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron TPMC-3SM Isys® 2.8” Wall Mount Touch Screen Contents Fusion RV™ Interface for TPMC-3SM 1 Introduction ............................................................................................................................... 1 Touch Screen Configuration...................................................................................................... 2 Hard Button Controls.................................................................................................................
Crestron TPMC-3SM Isys® 2.8” Wall Mount Touch Screen Fusion RV™ Interface for TPMC-3SM Introduction The Crestron® TPMC-3SM Isys® 2.8” Wall Mount Touch Screen works directly with Fusion RV™ Remote Asset Management Software to provide a powerful enterprise-wide room scheduling solution.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Touch Screen Configuration The TPMC-3SM touch screen supports a direct connection to Crestron’s Fusion RV software application. To connect to Fusion RV, first enter the “Panel Setup Options” screen by touching the screen while booting the touch screen. Set the desired Ethernet configuration for the touch screen using the “Ethernet Setup” screens and make note of the touch screen’s IP address.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM After the touch screen has updated, the screen will display a “Waiting for RoomView connection…” message, as shown in the following illustration. “Waiting for RoomView connection…” Screen The TPMC-3SM must now be added to the Fusion RV application and associated with a room. Using a Web browser, navigate to your facility’s Fusion RV Web site. The Fusion RV login window, shown in the following illustration, will be displayed.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM After login, the Fusion RV “Setup” screen will be displayed, as shown in the following illustration. Fusion RV “Setup” Window First, a room must be added. Then, the touch screen can be associated with the room. Select Add Room. Fusion RV “Add Room” Window (“Room Details” Tab) 4 • Fusion RV™ Interface for TPMC-3SM Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Enter a room name (e.g. Conference Room 100) and Location (e.g. Building 100). NOTE: In order for the Available Rooms feature to work, the Location field must be populated. All rooms within the same location should have the same text in the field. Select the Assets tab. Fusion RV “Add Room” Window (“Assets” Tab) Enter a name for the touch screen. From the Type dropdown list, select Touchpanel. Then, select the make (Crestron) and model (TPMC-3SM).
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Fusion RV “Asset Details” Window From the Connection Type dropdown list, select Network and enter the IP address of the touch screen in the IP Address/Hostname field. Select Save to close the “Asset Details” window and return to the “Add Room” window. Then, select Save & Close to close the “Add Room” window. Exit the setup menu by either closing the browser or, to monitor, click the monitoring button ( ) in the upper right corner of the window.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Hard Button Controls Once Fusion RV has successfully connected to the touch screen, the screen should look something like the following illustration. Main Screen The following table explains the function of the TPMC-3SM’s hard button controls. NOTE: For any button press that results in a page flip away from the main screen, the screen will revert to the main view after a timeout period.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Main Screen Controls In addition to the hard button controls on the TPMC-3SM, there are four on screen controls on the main screen. Main Screen The following table explains the function of the TPMC-3SM’s main screen controls. BUTTON Meet Info Day View Avail Rooms Reserve Now 8 • Fusion RV™ Interface for TPMC-3SM FUNCTION Displays the “Current Meeting Information” screen. If there is no active meeting, this button will not be available.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Meeting Information Controls “Current Meeting Information” Screen The following tables explain the function of the TPMC-3SM’s CLOSE and MORE hard button controls, when the “Current Meeting Information” screen is displayed. NOTE: The screen will revert to the main view after a timeout period. BUTTON CLOSE MORE Operations Guide – DOC. 7268A FUNCTION Returns to the main screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM “Current Meeting Information” Screen After Pressing MORE BUTTON CLOSE 10 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the previous “Current Meeting Information” screen. Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Day View Controls “Day View” Screen The following table explains the function of the TPMC-3SM’s “Day View” screen controls. BUTTON FUNCTION TODAY Displays the “Day View” screen and the current workday schedule. The time period shown will be based on the current local time. CLOSE MORE ▲ ▼ SELECT Active Meeting Field Inactive Meeting Field Operations Guide – DOC. 7268A Closes the current screen and returns to the main screen. Changes day.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Add Appointment Controls When an inactive meeting field (i.e. an open time slot) is selected from the “Day View” screen, the “Add Appointment” screen is displayed. “Add Appointment” Screen The following table explains the function of the TPMC-3SM’s “Add Appointment” screen controls. BUTTON CLOSE + Save FUNCTION Returns to the “Day View” screen. The meeting will not be added to the room calendar.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Available Rooms Available Rooms The Avail Rooms button on the main screen displays the “Available Rooms” screen. “Available Rooms” Screen The following table explains the function of the TPMC-3SM’s “Available Rooms” screen controls. BUTTON CLOSE Closes the “Available Rooms” screen and returns to the main screen. MORE Displays the next “Available Rooms” screen, if there are multiple screens. Available Rooms Field Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Reserve - Menu Confirmation Selecting a room from the “Available Rooms” screen displays the “Reserve” screen. “Reserve” Screen The following table explains the function of the TPMC-3SM’s “Reserve” screen controls. BUTTON CLOSE Yes No 14 • Fusion RV™ Interface for TPMC-3SM FUNCTION Closes the “Available Rooms” screen and returns to the main screen. Makes the reservation for the room. Cancels the reservation and closes the “Reserve” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Reserve - Menu Selection Selecting a room from the “Available Rooms” screen displays the reserve - menu selection screen. Reserve - Menu Selection Screen The following table explains the function of the TPMC-3SM’s reserve - menu selection screen controls. BUTTON CLOSE 30 Min 60 Min 90 Min Operations Guide – DOC. 7268A FUNCTION Closes the “Available Rooms” screen and returns to the main screen. Reserves the room for 30 minutes.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Reserve - Please Wait After entering a room reservation, the “Please Wait” screen is displayed. “Please Wait” Screen There are no user controls on this screen. The touch screen is waiting for confirmation of the reservation. 16 • Fusion RV™ Interface for TPMC-3SM Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Reservation Confirmed When the touch screen receives confirmation of the reservation, the “Reservation Confirmed” screen is displayed. “Reservation Confirmed” Screen The following table explains the function of the TPMC-3SM’s “Reservation Confirmed” screen controls. BUTTON OK FUNCTION Returns to the main screen. NOTE: If OK is not selected within five seconds, the display automatically returns to the main screen. Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Emergency Broadcast When the server sends an emergency message, the screen displays the “Emergency Broadcast” screen. “Emergency Broadcast” Screen There are no user controls on this screen. 18 • Fusion RV™ Interface for TPMC-3SM Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Tools A hidden “Tools Main Menu” screen is provided on the TPMC-3SM to display and configure features of the scheduling user interface. To access the “Tools Main Menu” screen, touch and hold the room name on the main screen for five seconds. “Tools Main Menu” Screen The following table explains the function of the TPMC-3SM’s “Tools Main Menu” screen controls. BUTTON CLOSE About UI Configuration Room Configuration Date/Time Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM About “About” Screen The following table explains the function of the TPMC-3SM’s “About” screen controls. BUTTON CLOSE Return FUNCTION Returns to the main screen. Returns to the “Tools Main Menu” screen. On the “About” screen, the Push Capable indicator is green if the touch screen has the capability to dynamically receive meeting events from Fusion RV.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM UI Configuration “UI Configuration (Page 1 of 2)” Screen The following table explains the function of the TPMC-3SM’s “UI Configuration (Page 1 of 2)” screen controls. BUTTON CLOSE MORE Return Edit Enable Meeting Information Edit Enable Day View Edit Enable Available Rooms Edit Enable Reserve Now Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Displays the next “UI Configuration” screen. Returns to the “Tools Main Menu” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM “UI Configuration (Page 2 of 2)” Screen The following table explains the function of the TPMC-3SM’s “UI Configuration (Page 2 of 2)” screen controls. BUTTON CLOSE MORE Return Edit Available Time Edit Enable Panel Wake Up 22 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Displays the next “UI Configuration” screen. Returns to the “Tools Main Menu” screen. Displays the “Edit Available Time” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Meeting Info “Edit Meeting Info” Screen The following table explains the function of the TPMC-3SM’s “Edit Meeting Info” screen controls. BUTTON CLOSE Return Enable Show Button Enable Show Subject Enable Show Organizer Enable Show Times Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the Meeting Info button. Enables the Subject line to appear when a meeting is active.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Day View “Edit Day View” Screen The following table explains the function of the TPMC-3SM’s “Edit Day View” screen controls. BUTTON CLOSE Return Enable Show Button Enable Get Info Enable Reserve Meeting Enable Previous Day Before Today 24 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the Day View button.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Available Rooms “Edit Available Rooms” Screen The following table explains the function of the TPMC-3SM’s “Edit Available Rooms” screen controls. BUTTON CLOSE Return Enable Show Button Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the Available Rooms button.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Reserve Now “Edit Reserve Now” Screen The following table explains the function of the TPMC-3SM’s “Edit Reserve Now” screen controls. BUTTON CLOSE Return Enable Show Button + Enable Force Even End Time Enable Time Selection 26 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the Reserve Now button. Increases the maximum duration of the meeting in 30 minute increments.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Available Time “Edit Available Time” Screen The following table explains the function of the TPMC-3SM’s “Edit Available Time” screen controls. BUTTON CLOSE Return Enable Show Available Time Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the Available Time to appear when the room is available.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Panel Wake Up “Edit Panel Wake Up” Screen The following table explains the function of the TPMC-3SM’s “Edit Panel Wake Up” screen controls. BUTTON CLOSE Return Enable Wake Up Panel When Meeting Begins 28 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “UI Configuration” screen. Enables the panel to wake up from standby when a meeting begins. Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Room Configuration “Room Configuration (Page 1 of 2)” Screen The following table explains the function of the TPMC-3SM’s “Room Configuration (Page 1 of 2)” screen controls. BUTTON CLOSE Return Edit Enable Decline for No Show Edit Privacy Level Edit Motion Sensor Edit Enable End Meeting Early Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “Tools Main Menu” screen. Displays the “Edit Decline for No Show” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM “Room Configuration (Page 2 of 2)” Screen The following table explains the function of the TPMC-3SM’s “Room Configuration (Page 2 of 2)” screen controls. BUTTON CLOSE Return Edit Enable Start Meeting Edit Enable Broadcast Message 30 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “Tools Main Menu” screen. Displays the “Edit Start Meeting” screen. Displays the “Edit Broadcast Message” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Decline for No Show “Edit Decline for No Show” Screen The following table explains the function of the TPMC-3SM’s “Edit Decline for No Show” screen controls. BUTTON CLOSE Return Enable Function - Applies to Meetings… + Applies to Meetings… - Decline Meetings After… + Decline Meetings After Enable Check for No Show at the Exact Minute Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Privacy Level “Edit Privacy Level” Screen The following table explains the function of the TPMC-3SM’s “Edit Privacy Level” screen controls. BUTTON CLOSE Return Enable Room is Public Enable Room is SemiPrivate Enable Room is Fully-Private 32 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen. Sets the room privacy level to Public. Sets the room privacy level to Semi-Private.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Motion Sensor “Edit Motion Sensor” Screen The following table explains the function of the TPMC-3SM’s “Edit Motion Sensor” screen controls. BUTTON CLOSE Return Sensor Type Sensor Output - Room Remains Occupied… + Room Remains Occupied… Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen. Sets the motion sensor to Intelligent or Basic mode.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit End Meeting Early “Edit End Meeting Early” Screen The following table explains the function of the TPMC-3SM’s “Edit End Meeting Early” screen controls. BUTTON CLOSE Return Enable Function Enable Use Minutes Enable Use Percent - Enable button… min after meeting starts + Enable button… min after meeting starts 34 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Start Meeting “Edit Start Meeting” Screen The following table explains the function of the TPMC-3SM’s “Edit Start Meeting” screen controls. BUTTON CLOSE Return Enable Function - Enable button… min after meeting starts + Enable button… min after meeting starts Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen. Enables the Start Meeting button.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Broadcast Message “Edit Broadcast Message” Screen The following table explains the function of the TPMC-3SM’s “Edit Broadcast Message” screen controls. BUTTON CLOSE Return Enable Function 36 • Fusion RV™ Interface for TPMC-3SM FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen. Enables the emergency broadcast message. Operations Guide – DOC.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Edit Date &Time “Edit Date & Time” Screen The following table explains the function of the TPMC-3SM’s “Edit Date & Time” screen controls. BUTTON CLOSE Return Date Format Time Format Operations Guide – DOC. 7268A FUNCTION Returns to the main screen. Returns to the “Room Configuration” screen. Formats the date to MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD. Formats the time to regular (6:00 PM) or army (18:00) time.
Isys® 2.8” Wall Mount Touch Screen Crestron TPMC-3SM Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
Crestron TPMC-3SM Isys® 2.8” Wall Mount Touch Screen If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 7268A (2032022) 11.11 Specifications subject to change without notice.
