Specifications

Crestron Isys i/O
™
TPMC-15/17-L Series Touchpanel Media Centers
Hardware Connections for the TPMC-15-CH-L (Shown Without 9-inch Power Cable)
LAN:
10/100 BASE-T
ETHERNET TO LAN
PWR:
FROM POWER OUT
CONNECTOR
(12.5VDC, 8.4A)
PC CARD:
FOR (2) TYPE II
PCMCIA CARDS
(BEHIND COVER)
VIDEO IN:
BALANCED VIDEO
INPUT OVER CAT5
PWR IN:
FROM TPMC-L-IMC
RS-232:
TO PC OR ANY
RS-232 DEVICE
USB:
FOR 3
RD
PARTY
PERIPHERALS
HEADPHONES
NET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
I/O AUDIO:
BALANCED AUDIO IN
& MIC OUT OVER CAT5
PWR OUT:
TO POWER PORT
ON TOUCHPANEL
CAUTION: When using an interface module to connect video signals to the
touchpanel, only use the TPMC-CH-IMC Interface Module. Use of other “IMC”
products could damage the panel.
Hardware Connections for the TPMC-15-QM-L (Shown Without 9-inch Power Cable)
LAN:
10/100 BASE-T
ETHERNET TO LAN
PWR:
FROM POWER OUT
CONNECTOR
(12.5VDC, 8.4A)
PC CARD:
FOR (2) TYPE II
PCMCIA CARDS
(BEHIND COVER)
PWR IN:
FROM TPMC-L-IMC
RS-232:
TO PC OR ANY
RS-232 DEVICE
USB:
FOR 3
RD
PARTY
PERIPHERALS
HEADPHONES
NET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
QM OUT:
QUICKMEDIA AUDIO,
VIDEO, RGB & MIC
OUTPUT OVER CAT5
PWR OUT:
TO POWER PORT
ON TOUCHPANEL
QM IN:
QUICKMEDIA AUDIO,
VIDEO, RGB & MIC
INPUT OVER CAT5
When connecting power, Crestron recommends using the included TPMC-L-IMC
Interface Module to bring power from the included power supply to the touchpanel.
The TPMC-L-IMC is connected between the power supply and touchpanel and
allows power lines to be run from a remotely located power supply to the touchpanel
using 14 gauge stranded speaker wire as shown in the following diagram.
Operations Guide – DOC. 6354B Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 59