Specifications

Touchpanel Media Centers Crestron Isys i/O
™
TPMC-15/17-L Series
Exit Details
Press Exit to leave the SETUP MENU and return to the project. If no project has
been loaded, the touchpanel will display an error message and return to the SETUP
MENU.
Mounting Options
The TPMC-15-L and TPMC-17-L touchpanels install simply and cleanly into
existing or newly constructed walls with an assortment of pre- and post-construction
mounting options. All mounting options are provided separately from the actual
touchpanel. Refer to the following table for a complete list of mounting options and
respective Installation Guides for these touchpanels.
Mounting Options for the TPMC-15/17-QM/CH-L
PRE-CONSTRUCTION*
OPTION
POST-CONSTRUCTION**
OPTION
MODEL NUMBER DOCUMENT
NUMBER
Back Box Kit - BB-15L
BB-17L
6362
6367
Pre-Construction Mount
Kit
- PMK-15L
PMK-17L
6363
6368
Mud Mount Kit
(accessory)
- MMK-15L
MMK-17L
6364
6369
Trim Mount Kit
(accessory)
- TMK-15L
TMK-17L
6365
6370
- Wall Mount Kit – Mud WMKM-15L 6364
- Wall Mount Kit – Trim WMKT-15L
WMKT-17L
6365
6370
* Pre-construction refers to framed walls prior to hanging drywall.
** Post-construction refers to framed walls with drywall hung.
NOTE: There is also a rack mount kit available for the TPMC-15-L touchpanel
(known as RMK-15L). Refer to the latest version of the RMK-15L Installation Guide
(Doc. 6366).
If the BB-15L/BB-17L or PMK-15L/PMK-17L are to be used and a touchpanel is
not available, the installer can either leave the hole in the mounting surface open (if
permitted by local building codes) or attach the cover plate supplied with the
mounting kit.
Touchpanel Mounting
Tools Required: #2 Phillips tip screwdriver
1. If the cover plate is attached, use a #2 Phillips screwdriver to loosen and
remove the four screws and plate.
2. Connect all required cables to the touchpanel. Refer to “Hardware Hookup”
on page 58 for details.
3. Insert the touchpanel (without its bezel) into the mounting option and align
the eight screw holes.
4. Insert and tighten the eight supplied screws (finger tight and then using a #2
Phillips screwdriver, tighten an additional 1/8-turn).
56 • Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series Operations Guide – DOC. 6354B