Specifications

Crestron Isys i/O
™
TPMC-15/17-L Series Touchpanel Media Centers
“Crestron Installation – Continue” Window
The “Crestron Installation – Continue” window is used after installation is complete.
It will allow you to validate the install and commit the changes. This window also
allows you to cancel an installation and discard any changes.
NOTE: Do not click OK until the installation of the selected software is complete.
Proceed with the directions for the particular hardware or software you are installing
(refer to the following pages). Then return to the post-installation procedure below to
complete the process.
Post-installation
When installation program is complete, click OK in the “Crestron Installation –
Continue” window. The “Crestron Installation – Confirm” window will appear
asking you if you want to reboot and save the changes. Click Yes.
“Crestron Installation – Confirm” Window
The final window will be the “Crestron Installation – Save” window to inform you
the system will reboot twice to commit the changes.
NOTE: This may take a few minutes to complete and should not be interrupted
unless the device is unresponsive for 30 minutes.
“Crestron Installation – Save” Window
After the second reboot, software installation is complete. If you have installed a
wireless network adapter and need to configure your network, refer to “Ethernet”
which starts on page 41.
Operations Guide – DOC. 6354B Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 53