Specifications

Touchpanel Media Centers Crestron Isys i/O
™
TPMC-15/17-L Series
Right click: simulates right-click of mouse
Size: toggles on-screen keyboard size (small, medium, large)
Keyboard translucence down: decreases keyboard translucence
Keyboard translucence up: increases keyboard translucence
On-Screen Keyboard
The initial position of the on-screen keyboard is determined by the VisionTools
®
Pro-e program or SIMPL Windows settings. The on-screen keyboard will default to
its largest size.
In use, when the on-screen keyboard is moved and/or resized and then closed, it will
re-open in the same position it was in and at the same size it was when closed. This
position and size will remain in memory until the touchpanel is re-booted or it is re-
set by the SIMPL Windows program. After reboot, the position of the on-screen
keyboard will revert to the defaults set in the VisionTools Pro-e or SIMPL Windows
program. The size will revert to the largest as determined by the firmware installed in
the touchpanel.
Exit the on-screen keyboard by selecting File | Exit or by pressing the “X” close
button in the upper right corner of the keyboard window.
SCREEN BRIGHTNESS Details
The SCREEN BRIGHTNESS can be varied from 0 to 100. To increase the
brightness, press Up. To decrease the brightness, press Down.
HARD KEY BACKLIGHT Details
Use the Up and Down buttons to adjust the brightness of the button lights on the
touchpanel base.
SHUTDOWN Details
To save any changes and reboot the touchpanel, press Save & Reboot, located in the
SHUTDOWN section of the SETUP MENU.
To turn off the touchpanel, press Shut Down, located in the SHUTDOWN section of
the SETUP MENU. This is the recommended method for shutting down the
50 • Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series Operations Guide – DOC. 6354B