Specifications

Crestron Isys i/O
™
TPMC-15/17-L Series Touchpanel Media Centers
The IP ID is the ID number that is used to identify the touchpanel in the control
system’s IP table. The IP ID should match the IP ID set in the SIMPL Windows
program.
Identity
Press Identity to open the “Network ID” window. The “Network ID” window
displays the hostname and workgroup that identify the touchpanel on the network.
The hostname may be used when transferring a program over Ethernet using
Crestron Toolbox. This window permits editing of the hostname and workgroup.
“Network ID” Window
NOTE: The hostname is required for Ethernet communication.
Sharing
Press Sharing to open the “Configure Shared Folders” window. This window is used
to set up shared folders. Sharing enables remote computers to view and/or modify
files stored on the touchpanel.
“Configure Shared Folders” Window
Click Add New Share… to browse and add directories with permission to read-only
or read/write. Click Close after adding all folders to be shared.
NOTE: For security reasons, there is no persistence of the shared drive(s) after the
panel is rebooted.
STANDBY TIMEOUT Details
The STANDBY TIMEOUT function can turn off the touchpanel display when the
screen has not been touched for a specified time frame (minutes). When the
touchpanel is activated, the last screen to be displayed reappears. Minutes can vary
Operations Guide – DOC. 6354B Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 47