Specifications

Touchpanel Media Centers Crestron Isys i/O
™
TPMC-15/17-L Series
noise, adjust ‘Fine’ to reduce or eliminate noise. You may also need to perform this
vertical line adjustment again after changing the size of the display image.
Calibrate - Auto, Default and Manual
Auto calibrate is the preferred setup method for RGB. Auto calibrate automatically
adjusts the input setting every time the source is selected. It looks at the sync for
“front and back porch” and sets them for the selected input. Auto calibrate is a one-
time setting that is performed in the “Video Setup” window for each RGB input. You
must select the source and have it display before selecting Auto from the Calibrate
area. You can return to this setup screen when you want to perform auto calibrate in
the future.
If this selection does not look correct, select Default calibrate, which sets the input
setting to the factory defaults.
Manual calibrate permits you to manually adjust the controls.
NOTE: If you are unable to obtain a stable RGB window using Auto or Default,
perform the manual lock sync adjustment (coarse and fine) before continuing with
the color size and position adjustments.
Presets
Up to 30 presets may be stored for future retrieval. Press Load to load the settings of
the preset location displayed. Press Store to store the settings in the preset location
displayed.
Video Setup (CH & QM versions)
The setup screen for each video source contains the settings as displayed in the
following illustration. Changes are made in real time.
“Video Setup” Window - Video 1 Tab
34 • Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series Operations Guide – DOC. 6354B