Specifications

Crestron Isys i/O
™
TPMC-15/17-L Series Touchpanel Media Centers
Identity Code
Net ID
The Net ID of the TPMC-15/17-L has been factory set to 03. The Net IDs of multiple
TPMC-15/17-L devices in the same system must be unique. The NET ID is set using
the internal setup menu (refer to “Cresnet” on page 29). Net ID may also be set from
a personal computer (PC) via the Crestron Toolbox™ (refer to “Establishing
Communication” on page 72).
When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the SIMPL™
Windows
®
program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
IP ID
The IP ID is set within the TPMC-15/17-L’s table using Crestron Toolbox. For
information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs
of multiple TPMC-15/17-L devices in the same system must be unique.
When setting the IP ID, consider the following:
• The IP ID of each unit must match an IP ID specified in the SIMPL
Windows program.
• Each device using IP to communicate with a control system must have a
unique IP ID.
Configuring the Touchpanel
NOTE: The only connection required to configure the touchpanel is power. Refer to
“Hardware Hookup” on page 58 for details.
The TPMC-15/17-L is configured from the SETUP MENU.
NOTE: If no project has been loaded or if an invalid project has been loaded, the
touchpanel displays an error message and defaults to the SETUP MENU screen.
If a project is running, the SETUP MENU can be accessed using one of two
methods: USB keyboard or Crestron Toolbox.
Via USB Keyboard
1. Attach a USB keyboard (refer to “Hardware Hookup” which starts on page
58 for details).
2. Open the “Validate User Account Info” window (shown on the following
page) by pressing Ctrl+Alt+Shift on the keyboard.
Operations Guide – DOC. 6354B Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 25