Specifications

Sonnex Multiroom Audio Unamplified Expander, 8 Zone Crestron SWE-8

•

Sonnex Multiroom Audio Unamplified Expander, 8 Zone: SWE-8 Operations Guide – DOC. 7202B

Operation

The SWE-8 operates in either Zone mode or Source mode. The SWE-8’s operating

mode is determined by the operating mode of the SWAMP-24X8.

For information on operating the SWAMP-24X8, refer to the SWAMP(I)-24X8

Sonnex Multiroom Audio System Operations Guide (Doc. 7049) at

www.crestron.com/manuals

Zone Mode

Zone mode uses the SWAMP-24X8’s front panel to route a source signal to a

selected zone. To use Zone mode, perform the following procedure:

1. Place the SWAMP-24X8 in Zone mode.

2. Press the ZONE button of the zone to be controlled.

3. Press the SOURCE button of the source to be routed. The associated

SOURCE and ZONE LEDs light. Alternatively, press the ZONE button

twice to turn on the zone and connect the last-selected source.

4. To turn off the zone, press the ZONE button.

Source Mode

Source mode uses the SWAMP-24X8’s front panel to select a source signal and

route it to multiple zones. To use Source mode, perform the following procedure:

1. Place the SWAMP-24X8 in Source mode.

2. On the SWAMP-24X8, press the SOURCE button of the source to be

routed. The associated SOURCE LED lights.

3. On the SWE-8, press the ZONE buttons of the zones to be selected. The

associated ZONE LED(s) lights.

4. To remove a zone from a source, press the desired ZONE button. The

associated ZONE LED turns off.