Specifications

Crestron SWE-8 Sonnex Multiroom Audio Unamplified Expander, 8 Zone

Operations Guide – DOC. 7202B Sonnex Multiroom Audio Unamplified Expander, 8 Zone: SWE-8

•

Connect to SWAMP24X8

-EXT1-S Sonnex Link Over

Fiber Extender

The

SWE-8 can be connected to a SWAMP-24X8 or S-EXT1-S Sonnex Link Over

Fiber Extender

via shielded CAT5 cable.

SWAMP-24X8 to SWE-8 Connection

NOTE: When the SWAMP-24X8 is connected to a control system using Cresnet

only one SWE-8 can be connected.

NOTE: When connecting a SWAMP-24X8 or S-EXT1-S to a SWE-8, Crestron

recommends using Crestron DM-CBL-8G or high-quality CAT5e shielded

twisted-pair cable. Shielded connectors such as the DM-8G-CONN (sold separately)

must be used.

NOTE: The maximum cable length between a SWAMP-24X8 or S-EXT1-S and

SWE-8 is 200 feet (61 meters).

Label the Buttons

Use Crestron Engraver software to print custom labels for the SWE-8’s front panel

buttons and LEDs. Crestron recommends printing on 100-pound paper. Paper

weighing less than 100 pounds tends to crumple while sliding in, while paper

weighing more than 100 pounds may not fit.