Specifications

Crestron SWE-8 Sonnex™ Multiroom Audio Expansion Switcher, 8 Zone
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
Four balanced/unbalanced audio outputs are provided, utilizing 5-pin terminal block
connectors. For connection details, refer to the following table and diagrams.
Audio Connections
SIGNAL
NAME
BALANCED AUDIO
OUTPUT
UNBALANCED
AUDIO OUTPUT
+ L + L + Out
- L - Open
G Shield/ground Common ground
+ R + R + Out
- R - Open
Typical Balanced/Unbalanced Outputs
Shield
AMP
Left
Right
+ - G + -
Balanced
Output
L R
+
+
AMP
Left
Right
+ - G + -
Unbalanced
Output
L R
+
+
Connect to SWAMP24X8 or
S-EXT1-S Sonnex Link Over
Fiber Extender
The SWE-8 can be connected to a SWAMP-24X8 or S-EXT1-S Sonnex Link Over
Fiber Extender via shielded CAT5 cable.
SWAMP-24X8 to SWE-8 Connection
NOTE: When the SWAMP-24X8 is connected to a control system using Cresnet
®
,
only one SWE-8 can be connected.
NOTE: When connecting a SWAMP-24X8 or S-EXT1-S to a SWE-8, Crestron
recommends using Crestron DM-CBL-8G or high-quality CAT5e shielded
twisted-pair cable. Shielded connectors such as the DM-8G-CONN (sold separately)
must be used.
Operations Guide – DOC. 7202A Sonnex™ Multiroom Audio Expansion Switcher, 8 Zone: SWE-8  11