Specifications

Crestron SWE-8 Sonnex™ Multiroom Audio Expansion Switcher, 8 Zone
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 PWR LED
(1) Green LED indicates operating power
supplied via power pack
2 HW-R (1) Recessed push button for hardware reset
3
ZONE (1-8)
(Buttons and LEDs)
(8) Push buttons and green LEDs, select
output zone for routing and adjustment
4
DIGITAL IN
2
Green
LED
Yellow
LED
Pin 8
Pin 1
(1) 8-wire RJ-45 female (8P8C modular jack);
Sonnex link input;
Connect to SWAMP-24X8 Multiroom Audio
System
3
or S-EXT1-S Sonnex Link Over Fiber
Extender
3
(each sold separately)
Green LED indicates link status;
Amber LED indicates data communication
AUDIO OUTPUTS
4
(8) Audio outputs consisting of one or more of
the following connectors:
L/R Unbalanced (Outputs 1-4)
(1) Pair RCA female, unbalanced stereo
line-level audio output
Output impedance: 100 Ohms
Maximum output level: 2 V
rms
Balanced L/R (Outputs 1-4)
(1) 5-pin 3.5 mm detachable terminal block,
balanced stereo line-level audio output
Output impedance: 200 Ohms balanced,
100 Ohms unbalanced;
Maximum output level: 4 V
rms
balanced,
2 V
rms
unbalanced
1
8
Balanced (CH) (Outputs 1-8)
5
(1) 8-wire RJ-45 female, shielded “Crestron
Home” CAT5 balanced stereo audio output
port. Connect to any “CH” CAT5 audio input
port or bidirectional audio port
2, 5
Maximum cable length: 500 feet
(152 meters) per port
Output impedance: 200 Ohms balanced
5
SPDIF OUT (Outputs 5-8)
(1) S/PDIF coaxial digital audio output
Output level: 0.5 V
rms
nominal
Output impedance: 75 Ohms
(Continued on following page)
Operations Guide – DOC. 7202A Sonnex™ Multiroom Audio Expansion Switcher, 8 Zone: SWE-8  7