Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8
2
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D
• Additional line-level, S/PDIF, and “CH” CAT5 balanced outputs
available
1
• 70/100 Volt “constant-voltage” output options available
• Output bussing enables linked operation of multiple adjacent zones
• Bridgeable outputs provide extra power for pools and other large areas
• Sonnex Link provides a 1-wire, plug-and-play interface to eight
SWAMPE expanders up to 200 feet (61 meters) away
2,3
• Sonnex Link over Fiber Extender S-EXT1-S (sold separately) enables
distances up to 2000 feet (610 meters)
• Includes 12 unbalanced, 4 balanced/unbalanced, and 8 S/PDIF inputs
• Supports direct audio connection of the CEN-IDOCV Docking
Interface (sold separately) and other “CH” CAT5 sources
4
• Allows audio return channel capability and extension of line-level and
S/PDIF signals using AUD-EXT Audio Extenders
• User adjustable volume, bass, treble, loudness, and selectable tone
profiles
• Installer adjustable 5-band graphic or parametric EQ per zone
• Dynamic Range Control maintains even listening levels in both quiet
and loud ambient environments
• Speaker Profiles allow upload of custom preset speaker settings
• Sonnex Speaker Protect™ affords extra headroom while preventing
component damage
• Individual zone power control and global standby
• Setup and adjustment via front panel or Sonnex Tools software
• Remote fault monitoring
• Seamless Crestron
®
system integration
• Heavy duty detachable terminal blocks ease speaker wire termination
• Low power consumption, cool-running operation
• 4-space 19” rack-mountable
Features and Functions
(Continued)
1. Additional S/PDIF and analog line outputs may be added using the SWE-8 Sonnex Multiroom Audio
Unamplified Expander (sold separately).
2. For connection of the Sonnex Link between the SWAMP-24X8 and each expander, use Crestron
DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable. The maximum cable length using
DM-CBL-8G or CAT5e is 200 ft (61 m) per run. For longer distances, use the S-EXT1-S Sonnex
Link over Fiber Extender (sold separately).
3. If using Cresnet
®
as the control system interface, system expansion is limited to one expander.
Support for more than one expander requires Ethernet as the control system interface.
4. CH (Crestron Home
®
) CAT5 balanced audio is supported using balanced inputs 13 – 16. All other
inputs require an ABAR-1 CAT5 Balanced Audio Receiver.