Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8
44
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D
Operation
The SWAMP-24X8 can be controlled from the front panel or the Sonnex Tool in
Crestron Toolbox.
NOTE: For information on Crestron Toolbox, refer to the Crestron Toolbox help
file.
Power
To turn on the SWAMP-24X8, move the POWER switch to . To turn off the
SWAMP-24X8, move the POWER switch to
.
Operating Modes
When operated from the front panel, the SWAMP-24X8 operates in either Zone
mode or Source mode.
Use the “Main Menu” to select Zone Mode or Source Mode. To display the “Main
Menu”, press MENU until Main Menu appears on the display.
“Main Menu”
Main Menu
Source Mode
▲
Zone Mode
Zone mode uses the front panel to route a source signal to a selected zone. To use
Zone mode, perform the following procedure:
1. From the “Main Menu”, press
q
or ▲ to display Zone Mode and press
ENTER.
2. Press the ZONE button of the zone to be controlled.
3. Press the SOURCE button of the source to be routed. The associated
SOURCE and ZONE LEDs light and the display shows the zone’s selected
source. Alternatively, press the ZONE button twice to turn on the zone and
connect the source that was selected last.
4. To turn off the zone, press the ZONE button.
5. Press MENU to return to the “Main Menu”.
Source Mode
Source mode uses the front panel to select a source signal and route it to multiple
zones. To use Source mode, perform the following procedure:
1. From the “Main Menu”, press
q
or ▲ to display Source Mode and press
ENTER.
2. Press the SOURCE button of the source to be routed. The associated
SOURCE LED lights.
3. Press the ZONE button(s) of the zone(s) to be selected. The associated
ZONE LED(s) lights.
4. To remove a zone from a source, press the desired ZONE button. The
associated ZONE LED turns off.