Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System

Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8

•

Firmware

Check the Crestron website to find the latest firmware. (New users must register to

obtain access to certain areas of the site, including the FTP site.)

Upgrade SWAMP-24X8 firmware via Crestron Toolbox.

1. Establish communication with the SWAMP-24X8 as described in

“Establishing Communication” which starts on page 41.

2. Select Tools | Package Update Tool… to upgrade the SWAMP-24X8

firmware or double click on an appropriate Package Update File (PUF)

located on the hard drive. The Package Update Tool is loaded as a

standalone application.

Program Checks

Actions that can be performed on the SWAMP-24X8 vary depending on whether it is

connected via Cresnet or Ethernet.

Cresnet Connections

For Cresnet connections, using Crestron Toolbox, display the network device tree

(Tools | Network Device Tree View) to show all network devices connected to the

control system. Right-click on the SWAMP-24X8 to display actions that can be

performed on the SWAMP-24X8.

Ethernet Connections

For Ethernet connections, using Crestron Toolbox, display the “System Info”

window (Tools | System Info) and select the Functions menu to display actions that

can be performed on the SWAMP-24X8.

Be sure to use Crestron Toolbox to create the SWAMP-24X8 IP table.

1. Select Functions | IP Table Setup.

2. Add, modify or delete entries in the IP table. The SWAMP-24X8 can have

only one IP table entry.

3. A defined IP table can be saved to a file or sent to the device.

Edit the control system’s IP table to include an entry for the SWAMP-24X8. The

entry should list the SWAMP-24X8’s IP ID (specified on the SWAMP-24X8’s IP

table) and the internal gateway IP address 127.0.0.1.