Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System

Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8

•

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade it is necessary to establish

communication. Once communication has been established, files (for example,

programs or firmware) can be transferred to the control system (and/or device).

Finally, program checks can be performed (such as changing the device ID or

creating an IP table) to ensure proper functioning.

NOTE: Crestron software and any files on the website are for authorized Crestron

dealers and Crestron Service Providers (CSPs) only. New users must register to

obtain access to certain areas of the site (including the FTP site).

Establishing Communication

Use Crestron Toolbox for communicating with the SWAMP-24X8; refer to the

Crestron Toolbox help file for details. There are three methods of communication:

indirect, USB, and TCP/IP.

Indirect

Indirect Communication

PC Running

Crestron Toolbox

Serial,

or USB

LAN

Cresnet

Control

System

COMPUTER

PWR

NET

HW-R

SW-R ACQUIRE ACTIVITY

SWAMP-24X8

SWAMP-24X8 connects to control system via Cresnet:

1. Click Tools | System Info.

2. Click the

icon.

3. For Connection Type, select Indirect.

4. For Device is at, select Cresnet ID and select the ID number from the drop-

down menu.

5. In the Through drop-down menu, select the control system.

NOTE: If no address book entry is listed for the control system, click

Address Book… to create an entry. For details, refer to the Crestron

Toolbox help file.

6. Click OK. Communications are confirmed when the device information is

displayed.