Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System
Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
39
2. Press
q
or ▲ to display Domain Name and press ENTER. The domain
name is displayed.
3. Press ENTER to return to the previous screen.
NOTE: The domain name can be changed with Crestron Toolbox.
Control Setup
Select this option to configure and view the SWAMP-24X8 control system settings.
Enter/Exit the “Control Setup”
Menu
To enter the “Control Setup” menu, perform the following procedure:
1. Enter the “Installer Mode” menu as described in “
Enter the “Installer
Mode” Menu” on page 26.
2. Press
q
or ▲ to display Control Setup and press ENTER.
3. To exit the “Control Setup” menu and return to the “Installer Mode” menu,
press MENU.
Lock Front Panel
The front panel controls of the SWAMP-24X8 can be locked to prevent unauthorized
access. To lock or unlock the front panel, perform the following procedure:
1. Enter the “Control Setup” menu as described above.
2. Press
q
or ▲ to display Front Panel Lock and press ENTER. The “Front
Panel Lock” screen is displayed.
“Front Panel Lock” Screen
Front Panel Lock
Off
▲
3. Press
q
or ▲ to display the desired setting and press ENTER. The display
returns to the previous screen.
Set the Cresnet ID
If the SWAMP-24X8 is to communicate with a control system over Cresnet, the Net
ID must be set. To set the Net ID using the front panel, perform the following
procedure:
1. Enter the “Control Setup” menu as described above.
2. Press
q
or ▲ to display Cresnet ID and press ENTER. The “Cresnet ID”
screen is displayed.
“Cresnet ID” Screen
Cresnet ID
A1
▲
q
3. Press
q
or ▲ to display the desired setting and press ENTER. The display
returns to the previous screen.
Set the IP ID
If the SWAMP-24X8 is to communicate with a control system over TCP/IP, the IP
ID must be set. To set the IP ID using the front panel, perform the following
procedure:
1. Enter the “Control Setup” menu as described on page 39.