Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8
38
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D
6. To save the default router and return to the “Network Setup” menu, move
the cursor to the right-most octet and press ENTER. To cancel the
operation and return to the previous screen, press MENU.
Enable/Disable DHCP
The SWAMP-24X8 can obtain an IP address, subnet mask, and default router
information from a DHCP server. To enable or disable DHCP, perform the following
procedure:
1. Enter the “Network Setup” menu as described on page 36.
2. Press
q
or ▲ to display DHCP and press ENTER. The “DHCP” screen is
displayed.
“DHCP” Screen
DHCP
Off
▲
3. Press
q
or ▲ to display the desired setting and press ENTER. The display
returns to the previous screen.
Enable/Disable WINS
The SWAMP-24X8 can be configured to use a WINS server for communication. To
enable or disable WINS, perform the following procedure:
1. Enter the “Network Setup” menu as described on page 36.
2. Press
q
or ▲ to display WINS and press ENTER. The “WINS” screen is
displayed.
“WINS” Screen
WINS
Off
▲
3. Press
q
or ▲ to display the desired setting and press ENTER. The display
returns to the previous screen.
Display MAC Address
To display the MAC address, perform the following procedure:
1. Enter the “Network Setup” menu as described on page 36.
2. Press
q
or ▲ to display MAC Address and press ENTER. The MAC
address is displayed.
3. Press ENTER to return to the previous screen.
Display Hostname
To display the hostname, perform the following procedure:
1. Enter the “Network Setup” menu as described on page 36.
2. Press
q
or ▲ to display Hostname and press ENTER. The hostname is
displayed.
3. Press ENTER to return to the previous screen.
NOTE: The hostname can be changed with Crestron Toolbox.
Display Domain Name
To display the domain name, perform the following procedure:
1. Enter the “Network Setup” menu as described on page 36.