Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System

Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8

•

Crestron DRC Screen

Zone 1

Crestron DRC On

4. Press

or ▲ to display the desired DRC setting and press ENTER.

5. Repeat for every zone to be configured.

6. Press MENU to return to the “Zone Setup” menu.

Set Global EQ

To adjust a global EQ setting, perform the following procedure:

NOTE: Adjusting a global EQ setting overrides the individual EQ settings for all

zones.

1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”

Menu” on page 28.

2. Press

or ▲ to display Global EQ and press ENTER. A list of Global EQ

settings is displayed.

3. Press

or ▲ to display the desired setting and press ENTER.

Confirm Global EQ Setting Screen

Are You Sure?

Yes

▲

4. Press

or ▲ to display Yes or No and press ENTER. The display returns

to the “Zone Setup” menu.

Expander Status

Select this option to view the status and information about devices that are connected

to the SWAMP-24X8. To view information, perform the following procedure:

1. Enter the “Installer Mode” menu as described in “Enter the “Installer

Mode” Menu” on page 26.

2. Press

or ▲ to display Expander Status and press ENTER. The

“Expander Status” menu is displayed.

3. Press

or ▲ to display the expander to view and press ENTER.

4. Press

or ▲ to view available information.

5. Press ENTER to return to the list of expanders.

6. To exit and return to the “Installer Mode” menu, press MENU.