Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8
32
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D
Bus Screen
Zone 1
Bus 5
▲
q
4. Press
q
or ▲ to display the bus to which the zone is to be assigned and
press ENTER.
5. Repeat for every zone to be assigned.
6. Press MENU to return to the “Zone Setup” menu.
Set Bus Volume Offset
To adjust a zone’s bus volume offset setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Bus Volume Offset and press ENTER. A list of
zones is displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Offset Screen is displayed.
Offset Screen
Zone 1
Offset 0
.0 dB
▲
q
4. Press the
q
or ▲ buttons to display the bus volume offset setting to be
applied and press ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
View Bussing Lists
To view the zones assigned to a bus, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Bussing Lists and press ENTER. A list of busses
is displayed.
3. Press
q
or ▲ to display the bus to view and press ENTER. The first zone
in the bus is displayed.
Bus Display Screen
Bus 5
Zone 2
4. Press
q
or ▲ to display the other zones contained in the bus.
5. Press ENTER to return to the list of busses.
6. Repeat for every bus to be viewed.
7. Press MENU to return to the “Zone Setup” menu.