Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System
Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
31
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Maximum Volume
To adjust a zone’s maximum volume setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Maximum Volume and press ENTER. A list of
zones is displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Max Vol screen is displayed.
Max Vol Screen
Zone 1
Max Vol 100%
q
4. Press
q
or ▲ to display the maximum volume setting to be applied and
press ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Startup Volume
To adjust a zone’s startup volume setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Startup Volume and press ENTER. A list of zones
is displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Startup Vol screen is displayed.
Startup Vol Screen
Zone 1
Startup Vol 25%
q
4. Press
q
or ▲ to display the startup volume setting to be applied and press
ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Bus Assignment
To assign a zone to a bus of zones, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Bussing and press ENTER. A list of zones is
displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Bus screen is displayed.