Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8
30
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D
2. Press
q
or ▲ to display Balance and press ENTER. A list of zones is
displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Balance screen is displayed.
Balance Screen
Zone 1
Balance 0
▲
q
4. Press
q
or ▲ to display the balance setting to be applied and press
ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Mono/Stereo
To adjust a zone’s mono/stereo setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Mono and press ENTER. A list of zones is
displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Mono/Stereo screen is displayed.
Mono/Stereo Screen
Zone 1
Stereo
▲
4. Press
q
or ▲ to display the mono/stereo setting to be applied and press
ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Minimum Volume
To adjust a zone’s minimum volume setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Minimum Volume and press ENTER. A list of
zones is displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Min Vol screen is displayed.
Min Vol Screen
Zone 1
Min Vol 25%
▲
q
4. Press
q
or ▲ to display the minimum volume setting to be applied and
press ENTER.