Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System
Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
29
Bass Screen
Zone 1
Bass 0.0 dB
▲
q
4. Press
q
or ▲ to display the bass setting to be applied and press ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Treble
To adjust a zone’s treble setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Treble and press ENTER. A list of zones is
displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Treble screen is displayed.
Treble Screen
Zone
1
Treble
0.
0
dB
▲
q
4. Press
q
or ▲ to display the treble setting to be applied and press ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Loudness
To adjust a zone’s loudness setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.
2. Press
q
or ▲ to display Loudness and press ENTER. A list of zones is
displayed.
3. Press
q
or ▲ to display the zone to be controlled and press ENTER. The
Loudness screen is displayed.
Loudness Screen
Zone 1
Loudness Off
▲
4. Press
q
or ▲ to display the loudness setting to be applied and press
ENTER.
5. Repeat for every zone to be adjusted.
6. Press MENU to return to the “Zone Setup” menu.
Set Balance
To adjust a zone’s balance setting, perform the following procedure:
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 28.