Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System
Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
15
Connectors, Controls, and Indicators (Continued)
# CONNECTORS,
1
CONTROLS, AND
INDICATORS
DESCRIPTION
12 FUSE
US/North America: T15AH (1/4” x 1-1/4”,
250 V, 15 A, time-lag, high-rupture rated)
fuse
2
;
International: T8AH (5 mm x 20 mm, 250 V,
8 A, time-lag, high-rupture rated) fuse
2
13 120V~50/60Hz MAX
12A
3
(1) IEC 60320 C14, main power inlet;
Mates with removable power cord
(included)
14 DIGITAL OUT (1-8)
(8) 8-wire RJ-45 female;
Sonnex expansion link outputs;
Green LED indicates link status;
Amber LED indicates data communication on
the corresponding output;
Connect to Sonnex Multiroom Audio
Expanders
4,5
(sold separately)
15 S/PDIF SOURCES
(17-24)
(8) RCA female;
S/PDIF coaxial digital audio inputs;
Input Impedance: 75 ohms
16 S/PDIF OUT (9-10) (2) RCA female;
S/PDIF coaxial digital audio outputs;
Output Impedance: 75 ohms
17 LAN
Green
LED
Yellow
LED
Pin 8
Pin 1
(1) 8-wire RJ-45 female;
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
PIN
SIGNALS
1
TX +
2
TX -
3
RX +
4
Connected to pin 5
5
Connected to pin 4
6
RX -
7
Connected to pin 8
8
Connected to pin 7
18 NET (2) 4-pin 3.5 mm detachable terminal blocks
Cresnet slave ports, paralleled
5
24: Power (24 Vdc)
Y: Data
Z: Data
G: Ground
NOTE: The NET port does not supply or
consume power.
(Continued on following page)