Specifications

Crestron SWAMP(I)-24X8 Sonnex Multiroom Audio System
Operations Guide – DOC. 7049D Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
9
SWAMP(I)-24X8 Specifications (Continued)
SPECIFICATION DETAILS
Audio (continued)
Power Limiting
3
Sonnex Speaker Protect (SSP) output
limiting;
Configurable 40 to 140 watts @ 8 ohms
40 to 240 watts @ 4 ohms
40 to 400 watts @ 8 ohms bridged
Tone Profiles
3
Flat, Classical, Jazz, Pop, Rock, Spoken
Word
EQ Modes
3
5-band graphic or 5-band parametric EQ
GEQ Center Frequencies
3
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz
GEQ Gain
3
±12.0 dB per band
PEQ Filter Types
3
EQ, High Pass, Low Pass, Treble Shelf,
Bass Shelf, Notch
PEQ Center Frequency
3
10 to 20,000 Hz per band
PEQ Gain
3
±12.0 dB per band
PEQ Bandwidth
3
0.1 to 3.5 octaves per band
Speaker Profiles
3
Comprises 5-band GEQ and SSP settings
Bus Volume Offset
3
±12.0 dB per zone for output bussing
Resolution/Bitrate
4
24-bit 48 kHz
Communications
Ethernet For control and console, 10/100 Mbps,
auto-switching, auto-negotiating,
auto-discovery, full/half duplex, DHCP
Cresnet For control and console Cresnet slave
5
Sonnex Link 64-channel (48 utilized) digital audio with
embedded control, auto-discovery,
auto-negotiating
Power Requirements
Main Power
SWAMP-24X8 12 amps @ 120 volts ac, 50/60 Hz
SWAMPI-24X8 6 amps @ 220-240 volts ac, 50/60 Hz
Cresnet Power Usage None
Environmental
Temperature 41º to 104º F (5º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 475 Btu/h (140 watts @ 8 ohms)
750 Btu/h (240 watts @ 4 ohms)
Enclosure
Chassis Metal with black finish, vented sides,
variable-speed fan-cooled
Front Panel Metal, black finish with polycarbonate label
overlay
Mounting Freestanding or 4U 19-inch rack-mountable
(feet and rack ears included)
(Continued on following page)