Specifications

Sonnex Multiroom Audio System Crestron SWAMP(I)-24X8

•

Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049D

Unamplified Outputs

For applications requiring line level zone outputs, Crestron offers the SWE-8 Sonnex

Multiroom Audio Unamplified Expander (sold separately). Each SWE-8 provides an

assortment of analog line level, S/PDIF digital, and Crestron Home (CH) CAT5

balanced audio outputs, offering a solution for routing audio to AV receivers,

powered subwoofers, headphone amplifiers, phone systems (for music-on-hold), and

other audio equipment.

70/100 V Option

Any amplified zone output can be converted to 70- or 100-volt output using one or

more Sonnex Output Transformers (SAT-70V/100V-2 or SAT-70V/100V-4, sold

separately). A 70/100 V (constant-voltage) speaker system allows for the connection

of numerous speakers per circuit and long wire runs using small-gauge wire. Typical

applications include outdoor speaker zones, commercial retail spaces, hallways, and

common areas.

Intelligent Monitoring and Protection

To help ensure the most seamless user experience and long-lived operation, Sonnex

includes several ways to keep tabs on its operating status and health. On its own,

Sonnex possesses the intelligence to protect itself from many types of faults

including over temperature, over current, over voltage, under voltage, and dc offset

on any channel. In the event of a fault, the front panel LCD provides clear fault

indication to speed the troubleshooting of incorrect wiring, poor rack ventilation, and

other unforeseen issues. Fault alerts may also be sent to a system touch screen or

mobile device, and integrators can even monitor and track the data remotely through

Crestron’s Fusion RV

software to ensure a rapid service response.

Ultimate Integration

Without question, Sonnex delivers unprecedented intelligence from source to

speaker. Via Cresnet

®*

or high-speed Ethernet, Sonnex affords incredible integration

potential as part of a complete Crestron system, enabling seamless control of every

room and source through a wide selection of touch screens, keypads, wireless

remotes, computers, and mobile devices. Complete setup is afforded via USB or

Ethernet, using Sonnex Tools software, part of the Crestron Toolbox™ installer

toolkit.

* If using Cresnet as the control system interface, system expansion is limited to one expander. Support

for more than one expander requires Ethernet as the control system interface.