Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System
“System Info” window in the section marked Ethernet however,
communications must be established in order to see this information in the
“System Info” window.
2.
Display the SWAMP-24X8’s “System Info” window (click the icon);
communications are confirmed when the device information is displayed.
TCP/IP
Ethernet Communication
PC Running
Crestron Toolbox
LAN
SWAMP-24X8
The SWAMP-24X8 connects to PC via Ethernet:
1.
Establish indirect / USB communication between SWAMP-24X8 and PC.
2.
Enter the IP address, IP mask and default router of the SWAMP-24X8 via
Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable
DHCP.
NOTE: Use the Device Discovery Tool in Crestron Toolbox to detect all Ethernet
devices on the network and their IP configuration. The tool is available in Toolbox
version 1.15.143 or later.
3. Confirm Ethernet connection between SWAMP-24X8 and PC. If
connecting through a hub or router, use CAT5 straight through cables with
8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to
connect the two LAN ports directly without using a hub or router.
4.
Use the Address Book in Crestron Toolbox to create an entry for the
SWAMP-24X8 with the SWAMP-24X8’s TCP/IP communication
parameters.
5.
Display the “System Info” window (click the icon) and select the
SWAMP-24X8 entry.
Programs and Firmware
Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron Web site as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.
SIMPL Windows
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
Firmware
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
Upgrade SWAMP-24X8 firmware via Crestron Toolbox.
1.
Establish communication with the SWAMP-24X8 and display the “System
Info” window.
2.
Select Functions | Firmware… to upgrade the SWAMP-24X8 firmware.
Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 45