Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System

NOTE: If using Cresnet for communications between the SWAMP-24x8

and a control system, only one SWAMPE Multiroom Audio Expander or

one S-EXT1-S Sonnex Link Over Fiber Extender (connected to a

SWAMPE Multiroom Audio Expander) can be connected.

2. If additional SWAMP-24X8 devices are to be added, repeat step 1 for each

device. Each SWAMP-24X8 is assigned a different Net ID number as it is

added.

If necessary, double click a device to open the “Device Settings” window

and change the Net ID, as shown in the following illustrations.

“Device Settings: Crestron SWAMP-24X8 (Cresnet)” Window

“Device Settings: Crestron SWAMP-24X8 (Ethernet)” Window

NOTE: The ID code specified in the SIMPL Windows program must

match the Net ID or IP ID of each unit. Refer to “Identity Code” on page

16.

Program Manager

Program Manager is the view where programmers “program” a Crestron control

system by assigning signals to symbols.

The symbol can be viewed by double clicking on the icon or dragging it into Detail

View. Each signal in the symbol is described in the SIMPL Windows help file (F1).

Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 43