Specifications

Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8
Display Hostname
To display the hostname:
1.
Enter the “Network Setup” menu as described on page 35.
2.
Press the T or ▲ buttons to display Hostname and press ENTER. The
hostname is displayed.
3.
Press ENTER to return to the previous screen.
NOTE: The hostname can be changed with Crestron Toolbox.
Display Domain Name
To display the domain name:
1.
Enter the “Network Setup” menu as described on page 35.
2.
Press the T or ▲ buttons to display Domain Name and press ENTER. The
domain name is displayed.
3.
Press ENTER to return to the previous screen.
NOTE: The domain name can be changed with Crestron Toolbox.
Control Setup
Select this option to configure and view the SWAMP-24X8 control system settings.
Enter/Exit the “Control Setup”
Menu
To enter the “Control Setup” menu:
1.
Enter the “Installer Mode” menu as described in “Enter the “Installer
Mode” Menu” on page 25.
2.
Press the T or ▲ buttons to display Control Setup and press ENTER.
3.
To exit the “Control Setup” menu and return to the “Installer Mode” menu,
press MENU.
Lock Front Panel
The front panel controls of the SWAMP-24X8 can be locked to prevent unauthorized
access. To lock or unlock the front panel:
1.
Enter the “Control Setup” menu as described above.
2.
Press the T or ▲ buttons to display Front Panel Lock and press ENTER.
The Front Panel Lock setting is displayed.
Front Panel Lock Settings
3.
Press the T or ▲ buttons to display the desired setting and press ENTER.
The display returns to the previous screen.
Set the Cresnet ID
If the SWAMP-24X8 is to talk to a control system over Cresnet, the Net ID must be
set. To set the Net ID using the front panel:
1.
Enter the “Control Setup” menu as described on page 38.
2.
Press the T or ▲ buttons to display Cresnet ID and press ENTER. The
Cresnet ID setting is displayed.
38 • Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations & Installation Guide – DOC. 7049B