Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System
Default Router
3.
Press the T or ▲ buttons to set the first octet of the default router.
4.
Press the soft key under the next octet (or press ENTER to move to the next
octet) to select it for editing.
5.
Repeat steps 3 and 4 for each octet.
6.
To save the default router and return to the “Network Setup” menu, move
the cursor to the right-most octet and press ENTER. To cancel the
operation and return to the previous screen, press MENU.
Enable/Disable DHCP
The SWAMP-24X8 can obtain an IP address, subnet mask, and default router
information from a DHCP server. To enable or disable DHCP:
1.
Enter the “Network Setup” menu as described on page 35.
2.
Press the T or ▲ buttons to display DHCP and press ENTER. The DHCP
setting is displayed.
DHCP Setting
3.
Press the T or ▲ buttons to display the desired setting and press ENTER.
The display returns to the previous screen.
Enable/Disable WINS
The SWAMP-24X8 can be configured to use a WINS server for communication. To
enable or disable WINS:
1.
Enter the “Network Setup” menu as described on page 35.
2.
Press the T or ▲ buttons to display WINS and press ENTER. The WINS
setting is displayed.
WINS Setting
3.
Press the T or ▲ buttons to display the desired setting and press ENTER.
The display returns to the previous screen.
Display MAC Address
To display the MAC address:
1.
Enter the “Network Setup” menu as described on page 35.
2.
Press the T or ▲ buttons to display MAC Address and press ENTER. The
MAC address is displayed.
3.
Press ENTER to return to the previous screen.
Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 37