Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System
Wattage Setting
4.
Press the T or ▲ buttons to display the speaker’s wattage rating and press
ENTER.
NOTE: If your speaker rating is not displayed, select the next-lowest rating
to avoid damage to the connected speakers.
5. Repeat for every zone to be configured.
6.
Press MENU to return to the “Zone Setup” menu.
Set Speaker Impedance
To specify the impedance of speakers connected to a zone output:
1.
Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 27.
2.
Press the T or ▲ buttons to display Impedance and press ENTER. A list
of zones is displayed.
3.
Press the T or ▲ buttons to display the zone to be configured and press
ENTER. The impedance setting is displayed.
Impedance Setting
4.
Press the T or ▲ buttons to display the speaker’s impedance rating and
press ENTER.
5.
Repeat for every zone to be configured.
6.
Press MENU to return to the “Zone Setup” menu.
Set Speaker Protection
To enable/disable speaker protection for a zone output:
NOTE: As speaker ratings vary greatly across manufacturers, there is no guarantee
that Sonnex Speaker Protect protects against speaker damage in all situations.
1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 27.
2.
Press the T or ▲ buttons to display Speaker Protect and press ENTER. A
list of zones is displayed.
3.
Press the T or ▲ buttons to display the zone to be configured and press
ENTER. The protect setting is displayed.
Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 33