Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System
Set Balance
To adjust a zone’s balance setting:
1.
Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 27.
2.
Press the T or ▲ buttons to display Balance and press ENTER. A list of
zones is displayed.
3.
Press the T or ▲ buttons to display the zone to be controlled and press
ENTER. The balance setting is displayed.
Balance Setting
4.
Press the T or ▲ buttons to display the setting to be applied and press
ENTER.
5.
Repeat for every zone to be adjusted.
6.
Press MENU to return to the “Zone Setup” menu.
Set Mono/Stereo
To adjust a zone’s mono/stereo setting:
1.
Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 27.
2.
Press the T or ▲ buttons to display Mono and press ENTER. A list of
zones is displayed.
3.
Press the T or ▲ buttons to display the zone to be controlled and press
ENTER. The mono/stereo setting is displayed.
Mono/Stereo Setting
4.
Press the T or ▲ buttons to display the setting to be applied and press
ENTER.
5.
Repeat for every zone to be adjusted.
6.
Press MENU to return to the “Zone Setup” menu.
Set Minimum Volume
To adjust a zone’s minimum volume setting:
1.
Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”
Menu” on page 27.
2.
Press the T or ▲ buttons to display Minimum Volume and press ENTER.
A list of zones is displayed.
3.
Press the T or ▲ buttons to display the zone to be controlled and press
ENTER. The minimum volume setting is displayed.
Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 29