Specifications

Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8
2. There are screws that secure each side of the SWAMP-24X8 top cover.
Using a #1 or #2 Phillips screwdriver, remove the four screws closest to the
front panel from one side of the unit. Refer to the diagram following step 4
for a detailed view.
3. Position a rack ear so that its mounting holes align with the holes vacated
by the screws in step 2.
4. Secure the ear to the unit with the four screws from step 2 and the additional
screw that is shipped with the SWAMP-24X8, as shown in the following
diagram.
Ear Attachment for Rack Mounting
5. Repeat procedure (steps 2 through 4) to attach the remaining ear to the
opposite side.
Stacking
Four “feet” are preinstalled with the SWAMP-24X8 so that if the unit is not rack
mounted, the feet can provide stability when the unit is placed on a flat surface or
stacked.
NOTE: No more than two SWAMP-24X8 units should be stacked.
18 • Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations & Installation Guide – DOC. 7049B