Specifications

Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
12
FUSE
The SWAMP-24X8 requires a T15AH (1/4” x
1-1/4”, 250V, 15A, time-lag, high-rupture
rated) fuse
2
;
The SWAMPI-24X8 requires a T8AH (5 mm x
20 mm, 250V, 8A, time-lag, high-rupture
rated) fuse
2
13
120V~50/60Hz MAX
12A
3
(1) IEC C14 male chassis plug, main power
input;
Mates with removable power cord
(included with SWAMP-24X8)
14
DIGITAL OUT (1-8)
(8) 8-wire RJ-45 female (8P8C modular jack);
Green LED indicates link status;
Amber LED indicates data communication on
the corresponding output;
Sonnex expansion link outputs;
Connect to SWAMPE Multiroom Audio
Expander
4,5
(sold separately) or S-EXT1-S
Sonnex Link Over Fiber Extender
4,5
(sold
separately)
15
S/PDIF SOURCES
(17-24)
(8) RCA female;
S/PDIF coaxial digital audio inputs;
Input Impedance: 75 Ohms
16
S/PDIF OUT (9-10)
(2) RCA female;
S/PDIF coaxial digital audio outputs;
Output Impedance: 75 Ohms
17
LAN (1) 8-wire RJ-45 female (8P8C modular jack);
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
18
NET (2) 4-pin 3.5mm detachable terminal blocks
Cresnet slave ports, paralleled
24: Power (24 Volts DC)
Y: Data
Z: Data
G: Ground
NOTE: The NET port does not supply or
consume power.
19
SETUP
(LED and button)
(1) recessed miniature push button and (1)
red LED, used for touch-settable ID (TSID) in
conjunction with Crestron Toolbox software
(Continued on following page)
14 • Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations & Installation Guide – DOC. 7049B