Specifications

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System
Specifications
Specifications for the SWAMP(I)-24X8 are listed in the following table.
SWAMP(I)-24X8 Specifications
SPECIFICATION DETAILS
Audio
Features
Input Signal Types
Output Signal Types
Analog-to-Digital Conversion
2
Source Compensation
2
Input Monitoring
2
Digital-to-Analog Conversion
3
Output Power
3
Damping Factor
3
Amplifier Monitoring
3
Frequency Response
3
Total Harmonic Distortion
(THD)
3
S/N Ratio
3
Stereo Separation
3
Zone Separation
3
Zone Volume Level Control
3
Bass Control
3
Treble Control
3
Loudness Compensation
3
Dynamic Range Control
3
24x10 stereo matrix switcher, 8 stereo zone
DSP, 8 stereo zone power amplifier, Sonnex
Digital Audio Transport, speaker profiles,
Sonnex Speaker Protect, 5-band graphic or
parametric EQ, Dynamic Range Control
(DRC), tone profiles, source gain
compensation, amp bridging, output
bussing, individual zone power control,
global standby, source signal detection,
amplifier temperature and fault monitoring,
priority modes
1
, paging
1
, do-not-disturb
1
,
alarm clock and sleep timer
1
Stereo analog line (unbalanced and
balanced), S/PDIF coaxial (2-channel PCM
only)
Stereo speaker level, S/PDIF coaxial
(2-channel PCM only), Sonnex Link
24-bit 48 kHz
±10.0 dB per input
Source Signal Detect
24-bit 48 kHz
140 Watts per channel at 8 Ohms
240 Watts per channel at 4 Ohms
400 Watts per channel at 8 Ohms bridged
> 200 @ 20 Hz
Over Current, Over/Under Voltage, Over
Temperature, DC Offset, Clipping
20 Hz to 20 kHz, ±0.5 dB
0.02%
>105 dB S/PDIF in, >100 dB balanced or
unbalanced analog in, A-weighted
> 90 dB
> 95 dB
-80.0 to +20.0 dB, adjustable from 0% to
100% plus mute
±12.0 dB
±12.0 dB
On/Off
On/Off
(Continued on following page)
Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 7