Manualshelf

Specifications

ManualsBrandsCrestron ManualsComputer equipmentSW-VOTE
61626364656667686970
Crestron e-control Vote SW-VOTE
66 •• Demos Installation & Reference Guide — DOC. 5822
Demos
Two demonstrations on the use of the Voting Computer are included with the
package. Each demo is described along with an accompanying “bird’s eye view”
diagram of its SIMPL program. All demos use the following three files:
• A VT Pro-e source file (demovote.vtp file), containing pages for all three demos,
ready to be compiled LC-3000 touchpanel.
• A compiled touchpanel file (demovote.hex file); dervied from the above; ready to
upload to an LC-3000, CT-3000, CT-3500, or VT-3500.
• A Configuration file (demovote.ini) configures the server for all three demos.
In addition, each individual demo has a folder containing the following files:
• A SIMPL Windows source file (demo?.smw file), ready to be compiled for a
CNMSX-PRO control system (“PRO” = front panel with LCD display) with a
CNXENET (Ethernet) card in the DPA slot.
• A compiled control system program file which uses serial RS-232 communications
(demo?COM.bin file); derived from the above by commenting off the Virtual COM
port; ready to upload to such a control system.
• A compiled control system program file which uses EtherNet communications
(demo?TCP.bin file); derived from the above by commenting off the serial COM
port; ready to upload to such a control system.
The supplied SIMPL and VT Pro-e files may require conversion prior to compiling
and uploading if your target touchpanel is not one of those mentioned above.
Conversion is a simple matter using VT Pro-e.
Before attempting to run the demos, use the File | Configuration File… command
to make sure the server is using the configuration file named above.
Demo 1: Voting
[section incomplete]
Demo 1 SIMPL Windows Program
[section incomplete]
Demo 1 VT Pro-e Program
[section incomplete]
NOTE: Before proceeding to the actual demo page, start the server protocol by issuing the
Server | Start command.
[section incomplete]
Demo 2 Request-to-Speak
[section incomplete]
Demo 2 SIMPL Windows Program
[section incomplete]