Specifications

Crestron e-control Vote SW-VOTE

118 •• Appendices Installation & Reference Guide — DOC. 5822

StateEnd Voting Console

Description

Voting concluded

Direction

Voting Computer to control system

Type

Digital

Value

Assert: Voting concluded, console ready to display or print/save

(End Vote button feedback ON)

De-assert: Results displayed or printed/saved

(End Vote button feedback OFF)

Expected Reply To an assert: Display, PrintSave, or Abort

To a de-assert: None

Comments

Voting can be concluded either

§ by user interaction with the Vote Proctor window on the Voting Computer: End Vote

button (only enabled while the floor is opened); or

§ when control system issues the End signal when the floor is opened.

End vote feedback goes dark when:

§ User interaction with the Vote Proctor window on the Voting Computer: Display

Results or [Print &] Save Results button (both of which are only enabled after a

vote); or the Abort button (enabled during and after a vote);

§ control system issues the Display signal; or

§ control system issues the PrintSave signal.

Used in conjunction with the other “state” signals, StateStart, StateDisplay, and

StatePrintSave; and the pulsed signals, NewVote and AgendaTrigger. These

signals provide feedback to the control system about the voting sequence. They

can be used to highlight the sequence control buttons, or to enable/disable

touchpanel choices. (See “State Coordination,” page 61, for a “score sheet”

illustrating the sequence.)