Specifications

Crestron e-control Vote SW-VOTE

101 •• Appendices Installation & Reference Guide — DOC. 5822

MicSelect Request-to-Speak Console

Description

Currently recognized seat

Direction

Voting Computer to control system

Type

Analog

Value

Reset (set to 0): no seat recognized

Other values: seat number of recognized speaker

Expected Reply

None

Comments

This signal is sent out every time a seat is recognized to speak, or when the

currently recognized seat becomes otherwise unrecognized (either by being put on

hold; or by yielding — or being forced to yield — its remaining time).

Also, when the signal block is enabled, the last known state of the queues is re-

established. At that time, this signal is set to either 0 if no seat was recognized in

the last known state; or to the seat number of the seat that was recognized in the

last known state.

Also, reset (i.e., set to 0) when the signal block disabled.