User manual

DCS 6000 Digital Conference System User Manual
36
#
Menu
Settings
Description
Activating the ‘Arrow Down’
button in the right upper
corner reveals a window with
options to change settings for
a range of seats.
18.
Ambient Microphone –
Used to enable/disable a
connected AM 6040 Ambient
Microphone Unit.
When ‘enabled’, the Ambient
Noise Microphone is active.
When ‘Audio In 1 or 2’ is
routed to ‘Loudspeaker’’ and
‘Audio In Volume’ is set to a
value between 40dB and 0dB
the microphone will be
disabled.
If ‘Audio In 1 or 2’ is not
routed to ‘Loudspeaker’’ or
‘Audio In Volume’ is set to off,
the microphone will stay
disabled until enabled.
Please refer to section ‘AM
6040 Ambient Microphone’ for
more details about using an
ambient microphone.
19.
Operation mode –
Used for switching between
the operation modes. Please
refer to the section ‘Operation
Modes’.
Delegate interrupt mode –
Used to set the ‘Delegate
Interrupt Mode’. Please refer
to section ‘Delegate Interrupt
Mode’.