User manual

DCS 6000 Digital Conference System User Manual
32
#
Menu
Settings
Description
12.
Unit to Seat Relation –
All units connected are shown
in this list with ‘Serial Number’
and ‘Seat Number’.
When a unit is connected for
the first time, it will be
assigned the next available
‘Seat Number’
The ‘Seat Number’ can be
changed as required. If the
changed seat number is
already applied to a seat, the
seat number will simply be
shifted. The ‘Seat Number’ is
a numerical in the range 1 to
65535.
When the mouse curser is
moved to a seat number field,
the red light ring in the
microphone in the
corresponding Conference unit
is flashing until the curser is
moved to another field or
‘Submit Changes’ has been
activated. This feature makes
it easy to re-number the
units.
Speaker Attenuation –
is used to lower the output
level of the loudspeaker or
turn it off.
Left button –
Left button on some
conference units is a ‘Function
button’. If the unit feature
setting of the function, the
choices will be shown in a
drop down list. When setting
the function of a function
button, the physical button on
the unit should be exchanged
to match the selection in the
drop down list.
Disconnected Units -
If units are disconnected they
are marked with a yellow
indication in the list. The
units can be removed from
the list either individually or
all by clicking the yellow
button next to the title.