User manual

DCS 6000 Digital Conference System User Manual
20
Using wireless language distribution
The CU 6105 is connected to the Conference Units
using EC 6001-xx Cat5e cables. Both DCS-LAN
connectors on the CU 6105 can be used for
connecting Conference Units.
In this example one or more Interpreter Booth
with Interpreter Units and DH 6021 Headphone is
connected to the units. Audio from the Interpreter
Units can then be heard in the headphones
connected to the Chairman and Delegate Units.
A wireless language distribution system like ‘DCS
6000 Digital Infrared Language System’ can then
be connected to the Audio Out connectors (A, B, C,
& D), where the source to the outputs are
configured as ‘Floor’ and the interpreter
channels. Refer to section ‘Web Browser Setup
and Control’’ item #8.
Figure 0-H shows a setup where Floor and three
interpreter channels are distributed wireless.
The next figure shows the use of the AO 6004
Audio Output Unit to expand the number of
channels connected to the Digital Transmitter.
Figure 0-H DCS 6000 Digital Conference System with interpretation and wireless distribution, Floor, Ch.1 to Ch.7