User manual

DCS 6000 Digital Conference System User Manual
17
Connecting a PC
The CU 6105 is connected to the Conference Units
using EC 6001-xx Cat5e cables and is connected to
a PC with a LAN cable.
Opening the browser in the PC gives the option of
configuring the system and controlling the
Conference units from the PC. Please refer to
section ‘Web Browser Setup and Control’ for more
information.
Hint: On older PC’s to setup a fixed IP address on
both the PC and the CU might be needed.
Note: Depending on the type of PC a ‘Crossed’ LAN
cable has to be used.
Instead of using a ‘Crossed’ LAN cable, a LAN Router
can be inserted.
Figure 0-C Connecting the DCS 6000 Digital Conference System to
a PC
Connecting a PC and an iPad
The CU 6105 is connected to the Conference Units
using EC 6001-xx Cat5e cables.
A wireless access point with built-in router is used
for connection to the CU 6105 and the PC. The
iPad is connected wireless.
Opening the browser in the PC or on the iPad gives
the option of configuring the system and
controlling the Conference units from the PC
and/or iPad.
Please refer to section ‘Web Browser Setup and
Control’ for more information.
Figure 0-D Connecting the DCS 6000 Digital Conference System to a PC and an iPad
Connecting an audio recorder