User manual

DCS 6000 Digital Conference System User Manual
16
Connecting Units
This chapter gives an overview of typical system
connections using the CU 6105 Central Unit:
Although the schematics are typical and are
intended to give a general overview,
combinations of the schematics are however not
only possible, but very common used.
Connecting Conference Unit
The DCS 6000 Conference Units are connected to
the CU 6105 using EC 6001-xx Cat5e cables. This
is the basic connection of the system.
Both of the DCS-LAN chain connectors on the CU
6105 can be used for connecting any Conference
Unit or other units.
Please refer to section ‘Using only one DCS-LAN
chain’ for information about the number of units
which can be connected using one chain.
Refer to section ‘Using multiple DCS-LAN chains
’ when using both chains.
Figure 0-A Connecting DCS 6000 conference units.
When using JB 6104 Junction boxes, the
conference units can be connected and
disconnected without interrupting the conference.
Please refer to the ‘User Manual JB 6104’ for
further details.
Figure 0-B Connecting DCS 6000 conference units using JB 6104 Junction Boxes.