Specifications

Crestron e-control Mail SW-MAIL
79 •• Appendices Installation & Reference Guide — Doc. 5798
EchoSubj
Applies to
e-Mailer signal blocks
e-Mailbox signal blocks
Description
String sent as feedback in response to setting a new subject header
Direction
Server-to-system
Type
Serial
Value
Text of subject header from selected message
Expected Reply
None
Comments
Definition of this signal is optional.
e-Mailer signal block: This signal is generated in response to lookups only.
Signals that might precipitate this are LookupMsg,
ClearNames, NewMail, and manually picking a
message from a bound message scroller. Specifically
excluded are Shortcut signals, and the SetSubj signal.
e-Mailbox signal block: This signal is generated in response to opening an
e-mail message. The server “opens” e-Mail messages
by sending a Pick signal through the referenced IN box
scroller.
Serial data is limited to 83 characters. If the subject header exceeds this length, the
transmitted string is truncated and an ellipsis is substituted for the remaining
characters.
For efficiency, strings are only echoed when they change.
See SW-DBM documentation (Doc. 5823) for more information about the Pick
signal.