Specifications

Crestron e-control Mail SW-MAIL
72 •• Appendices Installation & Reference Guide — Doc. 5798
Done
Applies to
System signal blocks
e-Mailer signal blocks
e-Mailbox signal blocks
scroller signal blocks (“standard” or “custom”)
Description
Indicates requested operation completed successfully
Direction
server-to-system
Type
Digital
Value
Pulse
Expected Reply
None
Comments
Sent to control system in response to most system-to-server signals, indicating that
the requested operation has been successfully completed. Done is only sent if the
operation was successful. If it was unsuccessful, the Err signals are sent instead.
Typically, there is a 0.2-sec. delay between the leading and trailing edge of the
pulse.
Signals which respond this way list Done in their “expected reply” field in this
reference.
This signal is optional in systems, but always present in all other signal blocks.
The Done signal is typically used to provide feedback to the user, typically by de-
asserting a button’s feedback. Therefore, buttons which function together should
be grouped together in an Interlock symbol with the Done signal being connected
to the clear line of that symbol.
See Also ErrDescription, ErrNumber, and ErrTrigger signals