Specifications

Crestron e-control Mail SW-MAIL
4 •• How to Use This Manual Installation & Reference Guide — Doc. 5798
Crestron e-control Mail
How to Use This Manual
A Note on Printing This Document
Adobe and Acrobat are
trademarks of Adobe Systems
Incorporated.
This Portable Document File (PDF) can be printed with Adobe Acrobat Reader.
Printing from a Windows 95 platform, version 4.0 or later, is strongly recommended
because the figures print poorly with earlier versions. The latest version is freely
available from Adobe at http://www.adobe.com/acrobat/.
Quick Start
To see an “out-of-the-box” demonstration of Crestron e-control Mail as quickly as
possible, turn to the Quick Start Guide(s) beginning on the next page.
You will need:
• A Crestron CNMSX-PRO control system
• A touchscreen (LC-3000, CT-3000, CT-3500, or VT-3500); and
• A null-modem cable
Follow the instructions in the guides precisely in the order given and you should be
up and running in a matter of minutes.
NOTE: The demos included with this package are all compiled to two versions, a COM version for
use with an RS-232 serial connection, and a TCP version for use with an Ethernet connection (the
latter case requiring the CNX Gateway). The Quick Start Guides refer only to the COM versions of
these programs because setting up a serial connection is far simpler. We strongly recommend getting
at least one demo to work first using a serial connection. Once that works, try the TCP versions.
Instructions for setting up TCP/IP communications are provided under “Communications Setup,
Control System Side, TCP/IP,” on page 17).
You do not need to license the software to try the demos provided you are still within
the 15-day free trial period.
Section Summary
For more information, start with “Introduction” on page 8.
Detailed setup and configuration instructions follow “Introduction”.