Specifications

Crestron e-control Mail SW-MAIL
39 •• Server Configuration In Depth Installation & Reference Guide — Doc. 5798
“Editing the Queries table” in the SW-DBM manual (Doc. 5823) for more
information.
The Signal Analyzer Window
While the server protocol is running, the Server | Start w/Signal Analyzer
command from the Server Monitor window opens the Signal Analyzer window. (If
the server is already running, toggling Server | Signal Analyzer does the same
thing.)
The Signal Analyzer window, showing the all the active signal blocks defined in the demo configuration.
The DEMO3 signal block is selected. Therefore the DEMO3 signals are displayed in the lists to the left
and right. The Timestamps option is on; the Debug Info option off.
Signal Simulator
The top part of the window is for simulating receipt of incoming signals and
transmission of outgoing signals.
Signal Blocks & Connections
This list contains all active signal blocks as well as all active connections that have
signals defined (and hence can behave as signal blocks too).
To simulate an incoming or outgoing signal, you must first select an item from this
list.