Specifications

Crestron e-control Mail SW-MAIL
21 •• Server Configuration In Depth Installation & Reference Guide — Doc. 5798
NOTE: If the server cannot open a specified configuration file, the server uses default values for all
options. If any changes are made, a new config file is created (using the specified pathname).
The installer registers the file demos\demomail.ini as the current
Configuration Settings file. This file pre-configures the server for all four demos.
The Quick Start Guides — which instruct you to upload demo3 or demo4 – depend
on this file being set as the current config file. If you have changed the config file
and wish to run the demos again, you must first change it back.
Password Access
Access to the server’s Configuration Options window is password-protected. This is
to prevent end-user meddling with the configuration options, which can very
possibly disable the server’s proper operation.
Select Server | Configure. The server prompts the user for a password.
The configuration password dialog — controls access to the Configuration Options window
Enter crestron2 which displays all tabs. Entering anything else displays the
General tab only.
The Configuration options window, General tab, showing all tabs (correct password entered).