Specifications

Crestron Adagio
®
AMS Media System
Audyssey Control
Theater
Audyssey
Configuration
ON OFF
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
Press the soft button labeled ON to turn on Audyssey processing.
Press the soft button labeled OFF to turn off Audyssey processing.
Press the MENU button to save changes and return to the theater
tools.
• Press MENU to save changes and return to the previous screen.
Source Mode
Source mode is used to select and control sources that are connected to the AMS. A
selected source can also be routed to any room or rooms connected to the AMS or a
connected AAE.
Select a Source
To select a source:
• Press SOURCE to put the AMS in Source mode. The last source selected
by the selection knob is displayed on the LCD.
Source Mode
S1 AM/FM Tuner
Control
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
• Turn the selection knob until the desired source is displayed on the LCD.
Rooms that are connected to the displayed source are indicated on the room
buttons.
• Press the ENTER button (or the soft button labeled Control if it is a device
that can be controlled by the AMS) to select and control the source.
When using the out-of-the-box functionality, the AMS can control tuner cards
installed in slots 1 and 2, an iPod connected to a CEN-IDOC, and an AAS (when
connected).
Controlling a Tuner
A tuner card installed in either slot one or two can be controlled by the AMS front
panel.
The following assumes that a tuner card has been installed in slot one or two (or
both) as described in the tuner card’s guide.
Operations Guide – DOC. 6509B Media System: Adagio AMS • 69