Specifications

Crestron Adagio

AMS Media System

BUTTON 1

BUTTON 3

BUTTON 5

BUTTON 2

BUTTON 6

BUTTON 4

• Select the source for the button by turning the selection knob until the

desired source is displayed on the LCD. If a button is not to be used, select

Not Used.

• After selecting the source, press the ENTER button to save the assignment

and return to the list of buttons.

• Assign other buttons if desired. If all of the buttons have been

assigned/reassigned, press MENU to return to the Distributed Audio menu.

Restore Default Settings

The AMS can be restored to its default factory settings from the front panel. All

settings that have been made with Installer Tools, as well as room and source audio

settings will be reset to their factory defaults.

• Open Installer Tools as described on page 41, select Configure Distributed

Audio, and press the ENTER button.

• Turn the selection knob to select Restore Defaults, and press the ENTER

button.

Restore Defaults Warning

Restore Defaults:

All Audio Distribution

source and audio settings

will be reset. Continue?

SOURCE

ROOM

HOUSE

SURRND

THEATER

DISPLAY

Yes No

• Press the soft button labeled Yes to proceed and restore the default settings

or press No to cancel.

Identify Keypads

This screen allows you to identify keypads and APAD devices that are connected to

the AMS.

• Open Installer Tools as described on page 41, select Identify Keypads, and

press the ENTER button.

NOTE: Any attached AAE will automatically be identified by the AMS

during this step.

Operations Guide – DOC. 6509B Media System: Adagio AMS • 55